Karndean Art Select Hickory Nutmeg

22 oz. cans. Covers 150-185 sqft per can. May be used on substrates with moisture reading up to 98% RH. Dries in 10-20 minutes

1 Gallon. Covers 220-260 sqft and 2 hour open time. Trowel Application.

4 Gallon. Covers 880-1040 sqft and 2 hour open time. Trowel Application.

1 gallon Epoxy Resin is a trowel applied two-part adhesive mix with 1400-1800 sqft of coverage. 15 minute hardening time.

1 gallon DrySet LVT Adhesive is a solvent free easy to apply adhesive suitable for substrates with moisture readings up to 95%. Needs to be applied with a applied with 3/8" nap roller. Coverage of 350-450 sqft, work time of 8 hours and 10-15 minute set time.

4 gallon DrySet LVT Adhesive is a solvent free easy to apply adhesive suitable for substrates with moisture readings up to 95%. Needs to be applied with a applied with 3/8" nap roller. Coverage of 1400-1800 sqft, work time of 8 hours and 10-15 minute set time.

5 liter of Karndean's Clean routine rinse free cleaner. It is water soluble cleaner formulated for deep cleans and to maximize the protection of Karndean floors.

750 ml of Karndean's Clean routine rinse free cleaner. It is water soluble cleaner formulated for deep cleans and to maximize the protection of Karndean floors.

5 liters of Karndean's Remove Basic Stripper used in the removal of films and contaminates. Helps remove dirt and used before the application of Karndean's Refresh Floor Protector

750 ml of Karndean's Remove Basic Stripper used in the removal of films and contaminates. Helps remove dirt and used before the application of Karndean's Refresh Floor Protector

5 liters of Karndean's Refresh Floor Protector is a non-soluable polish that restores the finish of your floor and maximizes the protection of your floor.

750 ml of Karndean's Refresh Floor Protector is a non-soluable polish that restores the finish of your floor and maximizes the protection of your floor.

5 liters of Karndean's Refresh Commerical Polish and Floor Protector is the commercial version of their non-soluable polish that restores the finish of your floor and maximizes the protection of your floor.

Karndean's Residential Cleaning Floor Care Kit includes everything you need to mainting your new Karndean floors. It includes the Karndean Clean 750ml, Karndean Remove 750ml, Karndean Refresh 750ml, and Floor Protector Pack. The included coarse Remove Pad helps remove any dirt and contaminates, the soft Refresh pad allows you to polish and restore the finish of your new floor. The included Aplicator and Floor Care Guide has everything needed to maitain your new floors.

The KOVARA MBX moisture barrier is a three-layer composite material designed to be installed over concrete slabs with a humidity level of up to 95%. This high performance, quick installation moisture barrier is made to protect floor coverings from stains, warping and mold. The Karndean - 2" Gray Kovara Seam Tape is required for the installation of Kovara 95 moisture barrier

KOVARA 95 SEAM TAPE is a 2 in. wide tape used to cover seams of KOVARA 95. Can be used over concrete slabs with a maximum relative humidity of 95% and maximum pH of 12.

The KOVARA MBX moisture barrier is a three-layer composite material designed to be installed over concrete slabs with a humidity level of up to 95%. This quick installation moisture barrier is made to protect floor coverings from stains, warping and mold. This kit comes included with the neccessary Karndean - 2" Gray Kovara Seam Tape

The KOVARA MBX moisture barrier is a three-layer composite material designed to be installed over concrete slabs with a humidity level of up to 95%. This high performance, quick installation moisture barrier is made to protect floor coverings from staining, warping and mold. The Karndean - 2 1/2" Kovara Blue Seam Tape and Karndean - 4" Kovara White Double Sided Tape is neccessary for installation of The KOVARA MBX moisture barrier

KOVARA® MBX SEAM TAPE is a 2.5 in. wide tape used to cover seams between cuts of KOVARA® MBX. Can be used over concrete slabs with a maximum relative humidity of 99.5% and maximum pH of 12.

KOVARA® DOUBLE-SIDED TAPE is a 4 in. wide tape is used for sealing the seams between cuts of KOVARA® MBX. Can be used over concrete slabs with a maximum relative humidity of 99.5% and maximum pH of 12.

The KOVARA MBX moisture barrier is a three-layer composite material designed to be installed over concrete slabs with a humidity level of up to 99.5%. This quick installation moisture barrier is made to protect floor coverings from stains, warping and mold. This kit comes included with the Karndean - 2 1/2" Kovara Blue Seam Tape and Karndean - 4" Kovara White Double Sided Tape neccessary for installation.

Quiet Choice Premium Acoustic Underlayment was engineered to reduce sound transmission and resist mold and mildew. High shear strength material ensures long lasting protection.

The Versatrim Slim Trim 46 7/8" is a multifunctional 3-in-1 molding used to transition between two different surfaces. May be used as a T Molding, Reducer or End Cap. Comes included with a track and shim. The surface is made from High Wear Resistant Aluminum Oxide Laminate and a PVC Core.

The Versatrim Slim Cap is a 46 7/8" molding used for transitioning from vinyl flooring to carpet, fireplaces and doors. Sometimes referred to as a baby threshhold. Comes included with a track piece and shim. The surface is made from High Wear Resistant Aluminum Oxide Laminate and a PVC Core.

The VersaEdge XL Stair Nose 46 7/8" is stairnose molding that may be used as a flush or overlap stairnose. The surface is made from High Wear Resistant Aluminum Oxide Laminate and a Aluminum Core.