Mohawk SolidTech Select Founder's Trace Original Sandstorm

4 gallon. Mohawk V-One is a clear set, solvent free, multi-functional pressure sensitive adhesive made for the interior installation of all Mohawk sheet goods, LVT/LVP and composite tile over approved substrates. This adhesive is formulated to have extended working time for flexible installations. Mohawk V-One meets all Federal, State, and local government indoor air quality regulations. Up to 250 sf/gal 1/16" x 1/16" x 1/32" U-notch trowel or Up to 350 sf/gal 3/8" Nap paint roller.

1 gallon. Mohawk V-One is a clear set, solvent free, multi-functional pressure sensitive adhesive made for the interior installation of all Mohawk sheet goods, LVT/LVP and composite tile over approved substrates. This adhesive is formulated to have extended working time for flexible installations. Mohawk V-One meets all Federal, State, and local government indoor air quality regulations. Up to 250 sf/gal 1/16" x 1/16" x 1/32" U-notch trowel or Up to 350 sf/gal 3/8" Nap paint roller.

4 gallon pail. Mohawk PrimeCoat is a topically applied modified acrylic floor primer used to treat dry, dusty or porous substrates for a better bonding surface and to help ensure proper adhesive bond. Mohawk PrimeCoat is recommended to prime porous or dry substrates before installations to provide a smooth, tack-free surface that will improve adhesive application. Use on concrete substrates to reduce surface pH from as high as 12.0 to an acceptable level of 9.0 or less. Mohawk PrimeCoat may also be used to prime gypcrete surfaces and to de-tack adhesive residues. Apply one coat of PrimeCoat with a 3/8” nap roller as an even coat over the entire surface of the floor at a rate of 315 sf per gallon (1330 sf per pail). Allow the floor to dry completely after application.

4 Gallon. Coverage is 315-360 sf per gallon. Mohawk HydroSeal is a penetrating as well as a film-forming modified acrylic compound to be used to protect concrete substrates with in-situ Relative Humidity readings up to 90% per ASTM F2170, and alkalinity up to a pH of 11.0. It also may be used to treat dusty or porous substrates for a better bonding surface. Mohawk HydroSeal is nonflammable and dries to a clear film that is alkali, plasticizer, and water-resistant. To clean up while wet, use soapy water; when dry, a solvent may be required. Containers must be kept tightly closed. Protect from freezing.

1 Gallon. Coverage is 315-360 sf per gallon. Mohawk HydroSeal is a penetrating as well as a film-forming modified acrylic compound to be used to protect concrete substrates with in-situ Relative Humidity readings up to 90% per ASTM F2170, and alkalinity up to a pH of 11.0. It also may be used to treat dusty or porous substrates for a better bonding surface. Mohawk HydroSeal is nonflammable and dries to a clear film that is alkali, plasticizer, and water-resistant. To clean up while wet, use soapy water; when dry, a solvent may be required. Containers must be kept tightly closed. Protect from freezing.

4 Gallon. Coverage is 315-360 sf per gallon. Mohawk SurfaceSeal is a light-colored high strength acrylic based compound formulated to isolate cutback and other types of old adhesive residues. Mohawk SurfaceSeal will also improve dusty and porous floors to provide a clean surface for better adhesive bonds. It contains “zero calculated” VOC’s and does not contain any known hazardous materials. Existing adhesive must be mechanically removed to surface of the concrete Apply with a 3/8” short nap paint roller. *Cutback may contain asbestos fibers and should not be dry sanded or scraped. When removing excess, wet with water to prevent any dusting or treat as per local regulations (Znet recommends having professionals do asbestos removal).

Spray adhesive,6 pack of 22oz cans (allow to dry with no transfer to fingers when lightly touched -pressure sensitive adhesvie). Coverage depends on substrate type -roughly 140-160 sf per can.

Performance Accessories White Quarter Round is ready-to-paint and allows you to match any decor. 94" x 3/4" x 3/4". Used against cabinets, sometimes against baseboards if you choose to not remove them, and sometimes against other flat vertical surfaces such as some thresholds.

78.7" Transition (T-Molding/Reducer combo) that color coordinates with the floor. Single vinyl molding for 4 installation applications 78.7": T- Molding, Hard Surface Reducer, Carpet Reducer & End Molding. Compatible with 2mm - 8mm floors.

78.7" Stair Nose Molding that color coordinates with the floor. Sometimes referred as a Bullnose. Used on the outside corner of a stair or step down to finish/trim out the wood, laminate, or vinyl between the riser and the tread.

44" Flush Stair Cap with locking joint that color coordinate with the floor. Used on the outside corner of a stair or step down to finish/trim out the vinyl between the riser and the tread.

<h3><strong>Performance Accessories - Waterproof Quarter Round</strong></h3> <ul> <li><strong>Brand:</strong> Performance Accessories</li> <li><strong>Manufacturer:</strong> Mohawk Industries</li> <li><strong>Made in the USA</strong></li> <li><strong>Core Material:</strong> PVC</li> <li><strong>Surface Material:</strong> Highly Wear-Resistant, Aluminum Oxide Coated PVC</li> <li><strong>Dimensions:</strong> Length: 94.5", Width: 0.62", Height: 0.75"</li> <li>Designed for simple installation to complete any project with ease.</li> <li>Ready to paint for a perfect match with any chosen decor and palette.</li> <li>Waterproof for protection against spills, pet accidents, and water leaks.</li> </ul> <p>The <strong>Paintable White Waterproof Quarter Round</strong> is an easy and innovative solution designed for waterproof floors. It covers the necessary expansion gap and provides a water-tight perimeter seal. Simply place on top of your flooring along the wall or wall base and nail or glue into place in accordance with instructions for a secure and long-lasting installation.</p> <h3>WetProtect: The Right Kind of Waterproof</h3> <ul> <li><strong>FULL COVERAGE WATERPROOF PROTECTION</strong></li> <li>WetProtect is the only waterproof flooring system that is backed by a lifetime surface and subfloor warranty.</li> <li>This revolutionary trim provides a watertight perimeter seal to ensure maximum protection for the subfloor by preventing water from seeping between the floor and the wall.</li> </ul>

This unique underlayment combines the convenience of a fanfold application for quick and easly installation with exceptional sound performance and moisture protection to support your floor. This underlayment is 1.5 mm thick and covers 100 sqft. This is approved for uniclic floors and floors with an attached pad. Impact sound insulation, IIC 72/STC 66/Delta 26. Safety, Odorless and non-toxic.

<h3>Mohawk Moisture Barrier Underlayment</h3> <p>Introducing the Mohawk Moisture Barrier, a premium underlayment designed to protect and extend the life of your vinyl tile flooring. With a substantial <strong>6-mil thickness</strong>, this moisture barrier provides robust defense against dampness and moisture, ensuring your floors remain pristine and free from damage. Each roll covers an ample <strong>100 square feet</strong>, making it a practical choice for both small and large flooring projects.</p> <p>Specifically crafted for <strong>vinyl tile flooring</strong>, the Mohawk Moisture Barrier is an essential accessory that enhances the durability and longevity of your flooring investment. Its reliable thickness serves as a formidable barrier, safeguarding against moisture and potential mold growth. Trust <strong>Mohawk</strong>, a leader in flooring solutions, to provide a high-quality, effective underlayment that ensures your floors remain beautiful and resilient for years to come.</p>

<h3>Performance Accessories - PerimeterSeal® Tape</h3> <p><strong>PerimeterSeal® Tape - Perimeter Sealant Flooring Tape</strong> from Performance Accessories by Mohawk Industries. Made in the USA. PerimeterSeal® Tape seals the perimeter of any room, safeguarding both the flooring’s surface at the perimeter and the subfloor against spills and moisture damage.</p> <h3>Key Features:</h3> <ul> <li><strong>Advanced Protection:</strong> PerimeterSeal® Tape expertly seals the perimeter of any room, safeguarding both the flooring’s surface at the perimeter and the subfloor against spills and moisture damage.</li> <li><strong>Simple and Efficient Use:</strong> Requires no additional special tools or silicone caulking for corners and transitions, making the sealing process hassle-free.</li> <li><strong>Innovative Design:</strong> The recessed, hidden green section of PerimeterSeal® allows your flooring to naturally expand and contract while maintaining an effective moisture barrier, ensuring both durability and flexibility.</li> <li><strong>Versatile Application:</strong> Ideal for all floating floors, it can be used behind baseboards or quarter round, effectively protecting all expansion spaces.</li> <li><strong>Ease of Installation:</strong> Designed for a clean, quick, and easy installation process, accessible for both professionals and DIY enthusiasts.</li> </ul> <h3>Product Specifications:</h3> <ul> <li><strong>SKU:</strong> PSTP</li> <li><strong>Coverage:</strong> 100 linear feet</li> <li><strong>Unit Weight:</strong> 7.5 oz</li> <li><strong>Dimensions:</strong> 1-3/8" x 100' roll</li> </ul> <h3>Easy 3-Step Installation:</h3> <ol> <li><strong>Align and Adhere:</strong> Align one edge of PerimeterSeal's green section with the flooring edge and press to adhere.</li> <li><strong>Press into Space:</strong> Press the center (non-stick) green section of the tape into the expansion space.</li> <li><strong>Secure to Wall:</strong> Adhere the upper area of the tape to the wall.</li> </ol> <p>Once you've installed your quarter round or wall base, PerimeterSeal works "behind the scenes" to protect your flooring against swelling from household spills. It also protects your subfloor from water and mildew, reducing the risk of swelling, mold, and water damage.<br><br><strong><a title="View Full Instructions" href="https://www.dropbox.com/scl/fi/ytngjegy7lhwpgybn02mm/pa_perimeterseal_tape_installation.pdf?rlkey=u6e6c3fzear89q5dxtmrk75fs&amp;raw=1" target="_blank" rel="noopener">View Full Instructions.</a></strong></p> <p>The recessed, hidden green section of the PerimeterSeal enables your flooring to freely expand and contract, maintaining a defensive moisture barrier.</p> <p>Enjoy protected and durable flooring with PerimeterSeal® Tape – your solution for a safe and maintained floor space.<br><br><br></p>

8 pieces per box of the 48 inch White Stair Risers from Mohawk's Performance Accessories collection. 48in x 7 in x 0.5 in.

<h3>TreadBond Adhesive</h3> TreadBond is a high-performance stair adhesive. Performence Accessorie's Treadbond is fast-curing, 100%-solids, moisture-curing adhesive designed for installing wood, HDF, and vinyl stair treads, as well as vinyl and HDF stair noses. This gun-grade adhesive ensures a strong and durable bond. Made by Mohawk Industries. <BR><BR> <strong>Container Size:</strong> 29oz (858 mL) <br><Br> <strong>Features and Benefits:</strong> <ul> <li>2-hour curing time</li> <li>High bond strength</li> <li>Excellent elongation properties</li> </ul> <strong>Limitations:</strong> <ul> <li>Not suitable for substrates containing asbestos or adhesive residues</li> <li>Should not be used as a substitute for screws</li> <li>Interior use only; not recommended for areas with hydrostatic moisture or osmotic blistering conditions</li> <li>Best applied when substrate temperature is between 40°F and 100°F, with relative humidity above 30%</li> </ul> <strong>Application:</strong> <ol> <li>Insert TreadBond cartridge into a suitable caulking gun.</li> <li>Cut the tip and puncture the inner seal.</li> <li>Apply a serpentine bead of adhesive to the substrate.</li> <li>Use within 15 to 30 minutes under normal temperature and humidity conditions.</li> <br> <em>Note: Attached pad must be removed prior to installation of flooring plank on stairs. Flooring plank and stair nosing must be glued down with TreadBond Adhesive or a polyurethane construction adhesive.</em> </ol> <strong>Cleanup:</strong> <ul> <li>Clean tools with mineral spirits while the adhesive is fresh/wet.</li> <li>Remove any adhesive smudges immediately with mineral spirits.</li> <li>Dried residue can be gently rubbed off with a white cloth.</li> </ul> <strong>Product Performance Properties:</strong> <ul> <li>Polymer Type: Silane-modified</li> <li>Solids Content: 100%</li> <li>VOCs: < 20 g per L</li> <li>Density: 12.9 lbs. per U.S. gal.</li> <li>Flash Point: > 200°F</li> <li>Elongation: > 200%</li> <li>Shelf Life: 1 year in unopened packaging at 73°F</li> <li>Consistency: Smooth Paste</li> <li>Color: White</li> <li>Service Temperature Range: -10°F to 200°F</li> <li>Curing Time: 120 to 150 minutes</li> <li>Storage Conditions: 50°F to 90°F</li> </ul>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Nose will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This variant fits 1-1/8 inch stair noses and has a length of 42 inches.&nbsp; It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is a Stair Nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank.&nbsp;&nbsp;It</span><span>&nbsp;is designed to be fitted and glued to the unfinished Stair Tread Nose.&nbsp; An addition Mohawk Founders Trace Original Sandstorm plank that you supply can be clicked in behind the nose to cover the remaining unfinished area.&nbsp;</span></p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Tread will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This&nbsp;variant&nbsp;fits 1-1/8 inch stair noses and has&nbsp;a length of 42 inches.&nbsp;&nbsp;It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is the Stair Tread Kit&nbsp;which&nbsp;comes with both a stair nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank and one additional Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank. The additional plank will be cut to 42 inches, and clicks into the back of the stair nose to ensure coverage of your Entire Stair Tread.&nbsp;Both the nose and the additional plank are designed to be fitted and glued to the unfinished Stair Tread.</span></p><p><span>Not sure if you want the Stair Nose or the Stair Tread Kit?&nbsp;&nbsp;</span><a href="https://treadsplus.com/pages/stair-nose-vs-stair-tread" target="_blank" title="Stair Nose vs Stair Tread Kit" rel="noopener noreferrer">Click here</a><span>&nbsp;to learn more.</span></p><p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Nose will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This variant fits 1-1/8 inch stair noses and has a length of 47 inches.&nbsp; It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is a Stair Nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank.&nbsp;&nbsp;It</span><span>&nbsp;is designed to be fitted and glued to the unfinished Stair Tread Nose.&nbsp; An addition Mohawk Founders Trace Original Sandstorm plank that you supply can be clicked in behind the nose to cover the remaining unfinished area.&nbsp;</span></p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Tread will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This&nbsp;variant&nbsp;fits 1-1/8 inch stair noses and has&nbsp;a length of 47 inches.&nbsp;&nbsp;It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is the Stair Tread Kit&nbsp;which&nbsp;comes with both a stair nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank and one additional Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank. The additional plank will be cut to 47 inches, and clicks into the back of the stair nose to ensure coverage of your Entire Stair Tread.&nbsp;Both the nose and the additional plank are designed to be fitted and glued to the unfinished Stair Tread.</span></p><p><span>Not sure if you want the Stair Nose or the Stair Tread Kit?&nbsp;&nbsp;</span><a href="https://treadsplus.com/pages/stair-nose-vs-stair-tread" target="_blank" title="Stair Nose vs Stair Tread Kit" rel="noopener noreferrer">Click here</a><span>&nbsp;to learn more.</span></p><p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Nose will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This variant fits 1-1/2 inch stair noses and has a length of 42 inches.&nbsp; It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is a Stair Nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank.&nbsp;&nbsp;It</span><span>&nbsp;is designed to be fitted and glued to the unfinished Stair Tread Nose.&nbsp; An addition Mohawk Founders Trace Original Sandstorm plank that you supply can be clicked in behind the nose to cover the remaining unfinished area.&nbsp;</span></p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Tread will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This&nbsp;variant&nbsp;fits 1-1/2 inch stair noses and has&nbsp;a length of 42 inches.&nbsp;&nbsp;It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is the Stair Tread Kit&nbsp;which&nbsp;comes with both a stair nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank and one additional Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank. The additional plank will be cut to 42 inches, and clicks into the back of the stair nose to ensure coverage of your Entire Stair Tread.&nbsp;Both the nose and the additional plank are designed to be fitted and glued to the unfinished Stair Tread.</span></p><p><span>Not sure if you want the Stair Nose or the Stair Tread Kit?&nbsp;&nbsp;</span><a href="https://treadsplus.com/pages/stair-nose-vs-stair-tread" target="_blank" title="Stair Nose vs Stair Tread Kit" rel="noopener noreferrer">Click here</a><span>&nbsp;to learn more.</span></p><p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Nose will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This variant fits 1-1/2 inch stair noses and has a length of 47 inches.&nbsp; It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is a Stair Nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank.&nbsp;&nbsp;It</span><span>&nbsp;is designed to be fitted and glued to the unfinished Stair Tread Nose.&nbsp; An addition Mohawk Founders Trace Original Sandstorm plank that you supply can be clicked in behind the nose to cover the remaining unfinished area.&nbsp;</span></p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<p><span>Made from Mohawk Founders Trace Original Sandstorm flooring, this Stair Tread will now allow you to use your favorite flooring on&nbsp;your&nbsp;stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring!&nbsp; To make matters worse, a transition piece&nbsp;was often&nbsp;required at the top of the stairs&nbsp;posing both a hazard, and an eye sore.&nbsp; Treads Plus has made it possible to use true Mohawk* Founders Trace Original Sandstorm flooring to seamlessly transition from your flooring to your stairs.</span><br><span>This&nbsp;variant&nbsp;fits 1-1/2 inch stair noses and has&nbsp;a length of 47 inches.&nbsp;&nbsp;It&nbsp;comes in&nbsp;a beautiful bull nose design.&nbsp;</span></p><p><span>This&nbsp;variant is the Stair Tread Kit&nbsp;which&nbsp;comes with both a stair nose made from a Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank and one additional Mohawk Founders Trace Original Sandstorm Luxury Vinyl Plank. The additional plank will be cut to 47 inches, and clicks into the back of the stair nose to ensure coverage of your Entire Stair Tread.&nbsp;Both the nose and the additional plank are designed to be fitted and glued to the unfinished Stair Tread.</span></p><p><span>Not sure if you want the Stair Nose or the Stair Tread Kit?&nbsp;&nbsp;</span><a href="https://treadsplus.com/pages/stair-nose-vs-stair-tread" target="_blank" title="Stair Nose vs Stair Tread Kit" rel="noopener noreferrer">Click here</a><span>&nbsp;to learn more.</span></p><p><br><span>Treads Plus is an independent service and not affiliated with or sponsored by Mohawk or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Mohawk.</span></p>

<h3>Mohawk Moisture Barrier Underlayment</h3> <p>Introducing the Mohawk Moisture Barrier, a high-performance underlayment designed to safeguard and enhance the longevity of your vinyl tile flooring. With a substantial <strong>6-mil thickness</strong>, this moisture barrier delivers excellent protection against dampness and moisture, ensuring your floors stay in top condition. Each roll provides a generous <strong>400 square feet</strong> of coverage, making it a versatile option for various project sizes.</p> <p>Tailored for <strong>vinyl tile flooring</strong>, the Mohawk Moisture Barrier is an essential addition that boosts the durability and lifespan of your flooring investment. Its robust thickness serves as an effective barrier against moisture and potential mold growth. Trust <strong>Mohawk</strong> and <strong>Znet Flooring</strong> to offer a high-quality, reliable underlayment that keeps your floors looking and performing their best for years to come.</p>

12.2" x 48" Vinyl Stair Tread that color coordinates with the floor. A tread covers the full step. Packaged as 2 treads and 2 returns per carton.